8
(9) MC INPUT 1, 2 (RCA) terminals
These are the input terminals for MC cartridge (RCA).
(10) MC1 RCA/XLR switch
You can select either RCA (Unbalance) or XLR (Balance) matching the terminal of
phono cable connected to MC1.
(11) MC1 INPUT (XLR) terminal
When the phono cable to be connected is the balance type (XLR), connect them to this
input terminal.
(12) MM INPUT terminal
This is the input terminals for MM cartridge (RCA).
(13) OUTPUT (RCA) terminal
This is the output terminal of unbalance equalizer output (RCA); so, you can connect a
cord to an RCA input terminal specified to the line level (150 to 250 mV) such as an
AUX terminal of pre-amplifier.
(14) OUTPUT (XLR) terminal
This is the output terminal of unbalance equalizer output (XLR); so, you can connect a
cord to an XLR input terminal specified to the line level (150 to 250 mV) such as an
AUX terminal of pre-amplifier.
Rear Panel (Left Phono Equalizer)
Rear Panel (Right Phono Equalizer)
GND
XLR
RCA
MC INPUT
OUTPUT
DC IN
1
MM INPUT
2
3
1
2
NEUTRIK
PUSH
3
2
1
MADE IN JAPAN
MODEL EA-1000
KYODO DENSHI ENG CO.,LTD.
MADE IN JAPAN
MODEL EA-1000
KYODO DENSHI ENG CO.,LTD.
DC IN
OUTPUT
MC INPUT
1
XLR
RCA
GND
2
MM INPUT
3
NEUTRIK
PUSH
3
2
1
2
1
Do not connect between this terminal and a phono input terminal of pre-amplifier
having phono amplifier circuit, or the audio tone is distorted by the large input level.
Caution
If the MC1 RCA/XLR switch is switched to XLR when connecting a cable to the MC1
RCA terminal, a hum noise and so on can be heard in some audio system.
Caution
(12)
(9)
(15)
(14)
(13)
(11)
(10)
(16)
(12)
(9)
(15)
(14)
(13)
(11) (10)
(16)
