5
Names and Functions
Front Panel
①
②
③
① INPUT SELECTOR knob
The input terminal corresponding to the source played can be selected.
② LEFT LEVEL & RIGHT LEVEL knobs
The volume can be controlled; so, when the knob is turned to the right (clockwise rotation),
the volume is increased; and when it is turned to the left (counterclockwise rotation),
the volume is decreased.
③ OUTPUT SELECTOR knob
The unbalance output terminals 1 and 2 of RCA pin‑connector can be selected independently,
or be turned off.
For a source having many low frequency components or for volume change of large steps (in the
region lower than 8:00 direction), a popping noise may be heard from the speakers by operating
the MASTER VOLUME knob. However, this phenomenon is not failure and the noise can occur
because of being switched to the attenuation grade which is changed by the high precision rotary
switch volume control system.
CM-1000
Note
