8
TWEETER
WOOFER
PASSIVE RADIATOR
FREQ RESPONSE
SENSITIVITY
IMPEDANCE
MAX POWER
DIMENSIONS
WEIGHT
FINISH OPTIONS
GRILLE
IMAGES
.75” Soft Dome
(2) 3”Polypropylene w/ NBR Surround
(2) 3”Polypropylene w/ NBR Surround
65 Hz - 20 kHz
90 dB
8Ω
100 W
6.75” H x 18.5” W x 1.5” D
5.8 lbs.
Black Brushed Aluminum
Black Powder-Coated Pressure-Fit Aluminum
(2) .75” Soft Dome
(3) 3”Polypropylene w/ NBR Surround
(2) 3”Polypropylene w/ NBR Surround
65 Hz - 20 kHz
90 dB
8Ω
100 W
6.75” H x 26.5” W x 1.5” D
8.35 lbs.
Black Brushed Aluminum
Black Powder-Coated Pressure-Fit Aluminum
TEATRO
®
TFS1.0
TEATRO
®
TCE1.5
MUDDY OR BOOMY BASS
1.
Check the volume control for the subwoofer. Excess volume can cause speakers to sound distorted and unnatural.
2.
Try adjusting the crossover control on the subwoofer or the subwoofer setup on your receiver to a slightly lower frequency (example:
reduce from 120 Hz to 80 or 60 Hz).
3.
If the subwoofer or full size speaker is close to a corner, side or back wall, try moving it away from the wall. This may reduce the
“boomy” bass considerably.
4.
Bookshelf speakers placed in a semi-enclosed space or cabinet can artificially emphasize bass output. Reduce the bass control on
your amplifier or move the speakers to the front of the cabinet. Alternatively, reposition the speakers to a more open location.
DISTORTED SOUND FROM THE SPEAKERS
1.
This problem is usually caused by setting the volume control too high. Reduce the amplifier/receiver volume
to a lower level.
2.
If noise and distortion are audible at higher volume levels, your amplifier may not be powerful enough. Consider upgrading to a unit
with higher power.
NOTE: Remember, even though your Phase Technology speakers can handle considerable power levels, ANY speaker if used improperly can be damaged.
Consult your Phase Technology dealer for assistance in choosing a new amplifier or receiver.
[WARRANTY]
LIMITED WARRANTY
: Phase Technology warrants its loudspeakers to be free from defects in material and workmanship for a period of ten (10)
years for speaker product, limited lifetime for CI speakers, and three (3) years for the electronic components to the original purchaser. Purchase
must be made from an authorized Phase Technology dealer.
This warranty does not cover service or parts to repair damage caused by misuse, abuse, damage while in transit, alterations, unauthorized repairs,
failure to follow instructions, fire, flood or any other cause beyond the reasonable control of Phase Technology. Defects in speaker cabinets or
grilles must be brought to the attention of your dealer immediately after purchase. This warranty will be void if the products’ serial number has
been altered or removed.
Should your Phase Technology product require service, please call the MSE Audio customer service department for a return authorization.
All merchandise returned to Phase Technology without prior authorization will be refused. For your return authorization number, please call
855.663.5600 or email [email protected].
