SPECIFICATIONS
HV81
HV101
HV121
Woofer
8” treated paper cone
10” treated paper cone
12” treated paper cone
Amp Power
100
100
100
(Watts, continuous)
Amp Power
200
200
200
(Watts, peak)
Frequency Response
35-200 Hz
29-200 Hz
25-200 Hz
Dimensions*
10.75” W x 14.125” H x 14.75” D*
11.75” W x 17” H x 16” D*
14” W x 19.5” H x 18.25” D*
Finish
Black Woodgrain Finish
Black Woodgrain Finish
Black Woodgrain Finish
*Add 1” to depth for connection.
AMPLIFIER SETUP AND BASS MANAGEMENT
Many home theater receivers/processors have a feature that controls how the bass is processed and delivered
to the subwoofer. It also adjusts the amount of bass that is sent to your satellite speakers. Look carefully in your
amplifier or receiver’s instruction manual for details on how to adjust for the speaker size (sometimes called
“Speaker Setup”) for your system.
When using a Dolby® Digital or DTS™-capable receiver/processor with the subwoofer connected to the
subwoofer out on your amplifier turn the “LOW-PASS FREQUENCY” control to the highest setting (200 Hz) on
the back of your subwoofer. Set the subwoofer crossover setting in the speaker setup section of the amplifier
setup menu to 150 HZ (or the next highest setting) and set the Satellites and Center channels to “small”.
If you are NOT using the receiver’s internal processor for subwoofer control then turn the “CROSSOVER
FREQUENCY” control on the subwoofer to the 3 o’clock (150 Hz) setting.
WARRANTY
LIMITED WARRANTY
Phase Technology warrants its loudspeakers to be free from defects in material and workmanship for a period
of ten (10) years for speaker product and three (3) years for the electronic components to the original purchaser.
Purchase must be made from an authorized Phase Technology dealer.
This warranty does not cover service or parts to repair damage caused by misuse, abuse, damage while in
transit, alterations, unauthorized repairs, failure to follow instructions, fire, flood or any other cause beyond the
reasonable control of Phase Technology. Defects in speaker cabinets or grilles must be brought to the attention
of your dealer immediately after purchase. This warranty will be void if the products’ serial number has been
altered or removed.
To obtain warranty service, defective product must be shipped in its original carton or equivalent together with
original invoice or bill of sale, insured and prepaid to your authorized Phase Technology dealer or the factory
when warranty service is requested.
If you choose to return the defective product to the factory you must first call us at (888) phase-tk to obtain
a Return Authorization number prior to shipping. Product repaired under this warranty will be returned to you
freight collect.
Phase Technology Corporation www.phasetech.com
MSE Audio Group 8650 College Boulevard Overland Park, Kansas 66210 (866) 663-9770 www.mseaudio.com
