background image

Google Chrome Cast

Yes

Bluetooth

Yes

DLNA

Yes

Wi-Fi

802.11a,b,g,n,ac

Control Ap

MSE OS APP

Brand

Phase Technology Corp

Product Type

Audio Amplifier

Description

Audio Amplifier for both wired and wireless audio

Model Name

OS-440

Display

LED

Button and UI Controls

2 buttons and 4 LED (See UI description)

Included in Box

US version amplifier, AC Cord, and user manual

Frequency Response

20 Hz - 20 kHz

Output Power

4x40W rms @ 4 ohms (4 channel mode), 2x80W rms @ 8 ohms (bridged mode)

Inputs

RCA & Optical

Software Specifications

Hardware Specifications

Section 1: How to Configure Your OS-440 on a Wi-Fi Network

1. When you first power on your OS-440, and a network is not yet configured, the OS-440 will automatically trigger a ‘Hot 
Access Point’.
2. After booting, you will see a green power light indicator and the “Wi-Fi” light will be flashing green. The OS-440 is now ready 
for Wi-Fi pairing.
3. To configure your OS-440 on a Wi-Fi network, first open the Google Home app (if not already installed on your mobile device, 
it can be found in both the Google Play and iTunes stores.)

4. The Google Home app will discover any devices that are not already set up. Tap ‘Set Up’ to begin configuration of your 
OS-440.

Summary of Contents for OS-440











Reviews: