Phantos CF100 Manual Download Page 4

 

                                                                    6/11               

©

PHANTOS

®

 

  Distributed in Australia by PHANTOS  www.phantos.com.au   

 

When CH5 is activated, CH1-CH4 will function as program selector: 
 
CH1: Quick short flame chase effect 
CH2: Slow short flame chase effect 
CH3: Short flame chase from odd then even numbered canisters 
CH4: Full flame from all canisters   
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

                                                                    7/11               

©

PHANTOS

®

 

  Distributed in Australia by PHANTOS  www.phantos.com.au   

 

4. TROUBLE SHOOTING 

 
1. Unit does not respond to DMX: 
Check that the DMX cables are connected properly and are wired 
correctly (pin 3 is “hot”; on some other DMX devices pin 2 may be ‘hot’). 
It does matter which way the inputs and outputs are connected. 
 
2. Low output, mechanical noise or no output at all: 
Unplug immediately and check fuel level, the external fuse, remote 
connection, and power from the wall. If all of the above appears to be 
O.K., plug the unit in again. If machine does not function after 30 
seconds, discontinue operation or permanent damage to the unit may 
result. Return the machine to your dealer.   
 

 

Disconnect from mains before servicing. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for CF100







Reviews: