4/13
©
PHANTOS
®
Distributed in Australia by PHANTOS www.phantos.com.au
2.2.1 Line Termination
In DMX Mode, at the last fixture in the chain, the DMX output has to be
connected with a DMX terminator. This prevents electrical noise from
disturbing and corrupting the DMX control signals. The DMX terminator is
simply an XLR connector with a 120
(ohm) resistor connected across pins 2
and 3, which is then plugged into the output socket on the last projector in
the chain. The connections are illustrated below.
2.3 AC Power
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
Warning!!! All fixtures must be connected to circuits with a
suitable Earth Ground.
5/13
©
PHANTOS
®
Distributed in Australia by PHANTOS www.phantos.com.au
3 OPERATION INSTRUCTIONS
3.1 Menu Map
Display
Function
A001-A512
DMX Address
9/23/72CH
DMX Mode
CC00-99
Show 1, slow to fast
Ed00-99
Show 2, slow to fast
Er00-99
Show 3, slow to fast
Po00-99
Show 4, slow to fast
tr00-99
Show 5, slow to fast
tU00-99
Show 6, slow to fast
BE50
Sound Mode
R000-R255
LED 1 Dimmer
G000-G255
LED 2 Dimmer
B000-B255
LED 3 Dimmer
W000-W255 LED 4 Dimmer
ID01-14
Fixture ID, for chase effect
OPRT
Slave Unit
