background image

Page 6

Page 7

Mechanical / Technical Specifications

Inputs

1 HDMI Connector

Outputs

8/4/3/2 HDMI Connectors

Bandwidth

TMDS bandwidth 10.2 Gb/s

Compliance With  
HDMI Standard

Supports HDMI1.3+, HDMI1.2, HDMI1.1, DVI1.1 and HDCP

Link

Single Link: 1080p/60, 12 bit color depth, 1920x1200 max

Deep Color Support

Supports digital video formats in Deep Color Mode at up to 12 bits/
color

Lossless  
Compressed Digital 
Audio

Supports lossless compressed digital audio  
(Dolby

®

 TrueHD, Dolby

®

 Digital Plus and DTS

-HD Master Audio)

DDC Signal (Data)

Input DDC Signal: 5 Volts p-p (TTL) 

HDMI  Video/Audio 
Signal

Input Video Signal: 1.2 Volts p-p

HDMI  Connector

HDMI Connector: Type A, 19 Pin Female

I2C Communication

EDID and HDCP Bi-Directional Transparency from Display to Source

EDID Control

Active outputs connected via HDMI, or from internal library of default 4 
EDID settings

Power Source

KD-HDDA1X2, 1X3, 1X4 – 5 Volt DC @ 2 Amp, 100-240 VAC, 50-60 Hz
KD-HDDA1X8 – 5 Volt DC @ 3 Amp, 100-240 VAC, 50-60 Hz

Dimensions

KD-HDDA1X2, 1X3, 1X4 – W=8.5”, H=1.75”, D=4”
KD-HDDA1X8 – W=17”, H=1.75”, D=4”

Weight

KD-HDDA1X2, 1X3, 1X4 – 2 Lbs
KD-HDDA1X84 – 3.2 Lbs

1. 

Connect all cables before providing power to the unit.

2. 

Test for proper operation before securing unit behind walls or in hard to access spaces.

3. 

If installing the unit into wall or mounting bracket into sheet-rock, provide proper screw support 
with bolts or sheet-rock anchors.

1. 

Read and follow all instructions.

2. 

Heed all warnings.

3. 

Do not use this device near water.

4. 

Clean only with dry cloth.

5. 

Install in accordance with the manufacturer’s instructions.

6. 

Do not install near any heat sources such as radiators, heat registers, stoves, or other 
apparatus (including amplifiers) that produce heat.

7. 

Only use attachments/accessories specified by the manufacturer.

8. 

Refer all servicing to qualified service personnel. Servicing is required when the device has 
been damaged in any way including:

 

»

Damage to the power supply or power plug

 

»

Exposure to rain or moisture

Important Product Warnings:

Safety Instructions.

 

Please be sure to follow these instructions for safe operation of your unit.

You MUST use the Power Supply provided with your unit or you VOID  
the Key Digital

®

 Warranty and risk damage to your unit and associated equipment.

Summary of Contents for KD-HDDA1X2








Reviews: