Characteristics
Size 8hp (4 cm), epoxy white panel 1,6 mm.
Deep : 26mm with connector.
PCB in epoxy FR4 dual layer, 1,6 mm. Surface finish HASL
.
Ribbon cable, M3 and nylon nuts inc.
Consumption : ~5 mA (+12V) / ~4 mA (-12V)
Components tested and assembled by hand, in Brittany, France
.
Warnings (reminder)
The mix between the reso & the PW pushed to the extreme can sometimes give rise to saturation. If
the LED remains fixed, lower PW CTRL. Do not neglect the output attenuator...
I can not be held responsible for any degradation of equipment (speakers, headphones ...) or hearing
loss ;-)
*
Observations due to the design of this circuit ...
–
When the click level exceeds half, the tone setting becomes less audible ... solution = lower
the click
–
When the pitch is increased, the resonance seems to increase as well, and the decay gets
longer ... solution = lower the reso
thank you for your trust
Feel free to give me your opinion, criticism or wishes ...
Other modules are coming
__________________________ http://ph.neutre.free.fr __________________________
ph Neutre © 2018
