Using the Audio Device
LED Indications
Off
Powered Off
Green flash upon Power Press
Normal mode- connected to phone.
Blue flash upon Power press
Connectable state – will connect when phone is nearby
Blue fast Flashing
Device is in Discoverable state. Phone can connect to device
Blue on
Charger connected
Green On
Charge complete (when charger is connected)
Green Fast Flashing
Incoming Call
Green slow flashing
Call connected
Green very slow flashing
Call is on the phone
Blue slow flashing
Call is connected on the phone. Pressing Power button will pull
the call to dongle audio
Red Flashing
Battery Low
Blue and Red flash
Factory reset with device in discoverable mode
First Time Pairing:
-
Please charge before first use. Use the provided USB magnetic charger cable for charging. The
device should be fully charged in one hour.
-
The device should start up in Discoverable mode (Blue LED flashing)
-
If Blue LED is not flashing, press power button to make it discoverable
-
Go to Phone Bluetooth menu and connect to available H-BandXXXX device
-
The LED should flash Green for few seconds and switch off. The Device is now connected to the
phone
Incoming Call
During incoming call Green LED will flash fast
-
To Answer Call
Magnetic
charger
Speaker hole
Mic Hole
Power Button
Vol -
LED Indication
Vol +
