PGO BR-500, Service Manual

Page: 314 / 330

I. Parking Adjustment

pull back the lever to park the vehicle.

When parking is active, the ve hicle can’t move by
hand.

If the parking power isn’t enough, screw in the
nut(as figure shown) to adjust the power

Lubricate the adjusting nut whenever maintain the
vehicle.
J. Starting And Operation Instructions
a. Before starting the engine, be sure that the driver is seated properly in the buggy with the seatbelt .
b. Testing the buggy in an open space at the beginning to learn how to start, turn and stop.
c. Operate the buggy slowly until you are familiar with it.
d. The turning radius of this buggy is small and agile, so the centrifugal force is very high when turning
at high speed. Slow down to a more controllable speed when turning to prevent the buggy from rolling
over.
e. To prevent vehicle from rolling over, be sure to only turn the vehicle at a slow more controllable speed.
Heel on the ramp of the main board when turning. Keep your Leg rely on the foot pedal, you can
feel the buggy is stable because of the gravity is adjusted and won’t roll over.
Attention!

Although the vehicle allows you to start the engine at any gear positions, but keep in mind always
shifting at “N” or “P” to start the engine is much safer for you!
P.2-12
PGO BR-500 ENGINE