PGO BR-150 Bug Rider, Service Manual

Page: 5 / 72

1.1 The operation notice:
1. Always replace gasket, O ring, cotter, pins and clip whenever reassembled.
2. When tighten screws or nuts, lock tightly as per specified locking torque, and in the sequence of
cross direction.
3. Use PGO, or PGO Recommended parts.
4. After dismantling please wash all parts necessary for checking and grease all
contact surface when reassembling.
5. Use grease recommended by P.G.O.
6.When removing battery, please dismantle the negative pole (-) first, when
assembling please connect positive pole (+) first.
6. Before installing a new fuse, confirm the specification is correct or not.
7.After reassembling, please re-check that all connecting point, locking parts,
circuits, polar characteristics are good, before selling out.