GSPublisherVersion 241.1.7.100
STEP 9
STEP 10
Connect panel D to panels A & B as shown. Note that the groove on panel D goes into the
revealed edge on panel O (See Det. 9). Refer to the holes and/or grooves on the diagram to
determine the panel orientation.
Screw in the Left Tandem Runners in the shown positions on panels H & I. Det. 10 is applicable for
the four runners.
10
O
J
N
K
D
B
A
L
M
Det. 9
A
B
First, use these screws
to align the runner
holes with the
predrilled pilot holes.
Then, reinforce the
runners by adding
screws in the shown
positions.
Left Runner
H
I
C
G
L
M
F
N
E
O
D
Det. 10
H
C