Set Up Menu:
The setup menu is used to adjust the different parameters of the hazer.
The MENU button is used to navigate through the menu options.
• DMX512 Add:
Press the up and down arrows to adjust the DMX address.
• FAN SPEED:
press the up and down arrows to adjust the fan speed.
• VOLUME OUT:
press the up and down arrows to adjust the output volume 1-100%
• INTERVAL SET:
press the up and down arrows to adjust the interval time 10s-200s
• DURATION SET:
press the up and down arrows to adjust the duration time 10s-100s
First Time Operation - Panel Control:
• Before you start using this unit, please check there is no transportation damage, should there be any, please
do not use the device and contact your dealer immediately.
• The PFX1000H PRO is designed to be used with water based haze liquid, NEVER OIL BASED.
• Put the haze machine on a flat stable surface. Make sure no one can put any body part close to the heater output.
• Unscrew the Lid on the fluid bottle, fill up with a suitable fog liquid, do not to overfill. Screw the plastic cap
back on and ensure the tank never runs dry during operation.
• Connect the PFX1000H PRO to a suitable mains supply.
• There is a simple 4 button menu with LCD display on the back of the unit, the buttons control menu, Timer,
Volume and Stop. When you first turn on the haze machine you will need to wait for around 3-5 minutes for
the heater to warm up. Then you will get access to the controls.
• Press the menu button to scroll through options and use the up down buttons to make changes. Use the 4
button Menu to set, fan speed, volume, interval and duration.
• Once set the volume button activates manual mode, timer button activates timer mode. The stop button
stops timer and manual mode.
• After pressing stop allow the self cleaning function to run before turning the haze machine off.
First Time Operation With DMX:
• Before you start using this unit, please check there is no transportation damage, should there be any, please
do not use the device and contact your dealer immediately.
• The PFX1000H PRO is designed to be used with water based haze liquid. NEVER OIL BASED.
• Put the haze machine on a flat stable surface. Make sure no one can put any body part close to the heater output.
• Unscrew the Lid on the fluid bottle, fill up with a suitable fog liquid, do not to overfill. Screw the plastic cap
back on and ensure the tank never runs dry during operation.
• Connect the PFX1000H PRO to a suitable mains supply.
• There is a simple 4 button menu with LCD display on the back of the unit, the buttons control menu, Timer,
Volume and Stop. When you first turn on the haze machine you will need to wait for around 3-5 minutes for
the heater to warm up. Then you will get access to the controls.
• Press the menu button to scroll through options and use the up down buttons to make changes.
• Set a DMX address via the 4 button display.
• Once heated the hazer can be controlled by 2 channels of DMX, 1=Fan Speed and 2= Volume Output.
• Remember to set the volume output to zero, this runs the self cleaning function. Wait while this is
performed, then turn off the haze machine.
Self-Cleaning Function:
Please do not turn your unit straight off after using. This machine has a self-cleaning function. This pushes air
through the pump and heater to remove any residue of liquid left after use, this will prolong the life of the
heater. If in DMX mode turn the haze output to zero, then turn the power off after about 1 minute 30
seconds. If using the internal menu, use the stop button, then turn power off after 1minute 30 seconds.