3)76:,1*
*%
,QWHUPLVVLRQ
9HUVLRQ
BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
________________________________________________________________________________________
:$51,1*
The green ON-button always has to be pushed when the control box has been
currentless.
Never let the pump run dry!
:$51,1*
The protective grating of the material container must not be removed during the setting
and operation of the conveying pump
3)76:,1*,,
.
Before spraying or pumping, flush all hoses with water and empty them completely. If
necessary, lubricate the hoses with lime milk (depending on the guidelines of the
material producer).
The conveying pump
3)76:,1*,,
can be filled with the aid of a continuous mixer
(e.g. HM 2002, HM 22 / 24, HM 200, HM 5 or the like) or with ready-mixed material.
,QWHUUXSWLQJ2SHUDWLRQ
127(
Depending on the material used, long intermissions should be avoided, because
otherwise there is a risk that the material hardens in the pump and the hoses. Please
carefully follow all guidelines of the material producers (working time, weather
influence, e.g. sunlight, heat etc.).
Clean the pump before long intermissions.
Every interruption of the spraying operation may lead to minor irregularities in the
material consistency. However, the consistency returns to normal as soon as the
machine has worked for a short time.
