manualshive.com logo in svg

PFT G4X Super, Operating Manual, Page: 29 / 72

Share
Download
PFT G4X Super Operating Manual Download Page 29

Mixing pump G 4 X Super / G 4 X XL / Part 2 Overview, operation and service

Operation

5.1.2

Monitoring the machine

WARNING

Access by unauthorised persons!

The machine may only be operated when monitored.

5.1.3

Hazardous dusts

Figure 21: Dust protection

WARNING

Danger of damage to health!

In the long term, inhaled dust can lead to lung damage or

have other adverse health effects.

Use suitable face protection.

NOTE

The machine operator or the person working in the dusty

area always has to wear a dust protection mask when

filling the machine!
The rules of the Committee on Dangerous Substances

(AGS) can be found under Technical Rules for Dangerous

Substances (TRGS 559).

5.1.3.1 DUSTCATCHER G 4 SET

Figure 22: DUSTCATCHER

DUSTCATCHER G 4 X SUPER item no. 00432413.
DUSTCATCHER G 4 X XL item no. 00432418.
Consisting of:

Anti-dust grille with suction frame
Industrial vacuum cleaner
Deflector plate
Pipe clamp with rubber profile, edge protection and sealing profile

page 29 / 72

Summary of Contents for G4X Super









































































Reviews:

No comments