':ERH(':7IVMIW``6IZ)``IQEMPGEVXWIVZMGI$TƽS[GSQ
7IGXMSR`
Section 11 |
User Errors, System Faults,
and Warnings
PFlow Industries, Inc.
P 414 352 9000
F 414 352 9002
6720 N. Teutonia Ave.
Milwaukee, WI 53209
7]WXIQ*EYPXWGSRXMRYIH
*EYPX
4SWWMFPI'EYWI
7SPYXMSR
'SQQIRXW
Infeed Cart Logging Sensor
Fault
(the signal from the
infeed area cart logging
diffuse sensor has been
lost)
A foreign object has been
detected in the path of the
infeed area cart logging
sensor.
Remove all foreign objects
from the Cartveyor®.
Reset the system.
Removal of any and all
foreign objects must be
performed by authorized
personnel only!
The infeed area cart logging
sensor is dirty.
Clean the photo eye.
Reset the system.
Sensor maintenance must
be performed by authorized
personnel only!
The infeed area cart logging
sensor is misaligned.
Contact maintenance.
Realign the sensor.
Reset the system.
Sensor maintenance must
be performed by authorized
personnel only!
The infeed area cart logging
sensor is damaged.
Contact PFlow Industries,
Inc. Parts & Service for
replacement components.
Replacement components
must be replaced by
authorized personnel only!
Discharge Area De-
activation Sensor Fault
(the
signal from the discharge
area de-activation diffuse
sensor has been lost)
A foreign object has been
detected in the path of the
discharge area de-activation
sensor.
Remove all foreign objects
from the Cartveyor®.
Reset the system.
Removal of any and all
foreign objects must be
performed by authorized
personnel only!
The discharge area de-
activation sensor is dirty.
Clean the photo eye.
Reset the system.
Sensor maintenance must
be performed by authorized
personnel only!
The discharge area de-
activation sensor is
misaligned.
Contact maintenance.
Realign the sensor.
Reset the system.
Sensor maintenance must
be performed by authorized
personnel only!
The discharge area de-
activation sensor is
damaged.
Contact PFlow Industries,
Inc. Parts & Service for
replacement components.
Replacement components
must be replaced by
authorized personnel only!
Infeed Chain Jam Switch
(the chain monitor limit
switch located beneath
the chain jump guides on
the left-hand side of the
opening in the infeed track
pan has tripped)
The limit switch is
misaligned.
Contact maintenance.
Realign the limit switch.
Reset the system.
Limit switch maintenance
must be performed by
authorized personnel only!
The limit switch is damaged. Contact PFlow Industries,
Inc. Parts & Service for
replacement components.
Replacement components
must be replaced by
authorized personnel only!
There is a mechanical
problem with the drive
chain.
Contact PFlow Industries,
Inc. Parts & Service.
