Maintenance and cleaning
32 | 40
Operating instructions sample cleaner SLN 4 | Revision 4
8.1.2
Deawner
Getting rid of residual impurities:
The deawner must be empty.
Start the deawning process.
The impurities generally come off after approximately 60 s.
If it is possible to clean the deawner bottom by hand, you must remove the filling container.
CAUTION
The deawner could start and lead to hand injuries!
Pull the mains plug.
Undo both the screws at the side of the filling container.
Figure 21: Screws at the filling container
Item
Name
1
Screw
Remove the filling container from the deawner.
NOTICE
Make sure that you do not damage, cut or pull out any cables.
Clean the deawner with a damp cloth and/or compressed air.
After cleaning, re-mount the filling container at the specified place.
Insert the rubber bush on the casing through the recess; refer to
figure 22.
1
