Friabilimeter
operating instructions
© 2016 – Pfeuffer GmbH
Revision 7
Page 11 of 48
In the front hood, there is a blue magnet (see
Figure 3
) which interacts with the reed switch inside the
housing.
NOTE
The FRIABILIMETER cannot be taken into operation without the front hood!
The motor will stop immediately if the front hood is removed during operation!
Figure 3: Safety device (blue magnet) for front hood
Test
Interval
Method
m
V
Operating and danger areas on the FRIABILIMETER
2.2
Operating area
Make sure the installation height is sufficient (according to the stature of the operating personnel). A
suitable base (e.g. table) is required for this.
Danger area
The entire area one meter around the FRIABILIMETER is a danger area during maintenance and repair
work. Keep the area around the FRIABILIMETER clear of objects.
