background image

2

1.

Safety Precautions.................................. 3

1.1. For Your Orientation........................................................... 3

1.2. Pictogram Definitions........................................................ 3

2.

Understanding The Pump ....................... 4

2.1 Main 

Features..................................................................... 4

2.2. Differences Between The Pump Types.......................... 5

3.

Installation ............................................... 6

3.1. Setting Up The Pump And Location ................................ 6

3.2. Connection Of Pumping Stages....................................... 6

3.3. Connecting The Vacuum Side.......................................... 7

3.4. Connecting The Exhaust Side .......................................... 7

3.5. Connecting To Mains Power............................................ 7

3.5.1 Adjusting Voltage Selector............................................... 8

4.

Operations ................................................ 9

4.1. Important Information ....................................................... 9

4.2. Operation With Gas Ballast.............................................. 9

4.3. Shutdown .......................................................................... 10

5.

What To Do In Case Of Breakdown? ... 11

6.

Maintenance .......................................... 11

6.1. Precautionary Measures During Maintenance Work 11

6.2. Cleaning And Replacing Diaphragms And Valves...... 12

6.2.1. MVP 035-2 ......................................................................... 12

6.2.2. Product-Line MVP 055-3 / MVP 055-3C ........................ 13

7.

Service.................................................... 16

8.

Technical Data....................................... 17

8.1. Dimensions........................................................................ 18

8.2. Substances Which Come Into Contact With 

The Medium ...................................................................... 20

9.

Accessories ........................................... 20

10. Spare Parts............................................. 21

Contamination Declaration ......................... 22

Conformity Declaration ................... last page

Index 

Page

Modifications reserved

Please note!

Current operating instructions are available via
www.pfeiffer-vacuum.de under "Infoservice".

Summary of Contents for MVP 035-2

























Reviews: