1.3.2 Pictographs
Pictographs used in the document indicate useful information.
Note
Tip
1.3.3 Stickers on the product
This section describes all the stickers on the product along with their meaning.
C
US
TÜV Rheinland
Fuse
S/N
Mod.
HiCube 80 Eco
PM S74 100 00
- - - - - - - -
P/N
Input
Mass
D-35614 Asslar
Made in Germany 2018/06
T 2 A H 250 VAC
100-240 V +/-10 % 2.00 A 50/60 Hz
12.5 kg
Rating plate
The rating plate is located on the back of the pumping station
housing.
VOR INBETRIEBNAHME
TRANSPORTSICHERUNG LÖSEN
BEFORE USE UNFASTEN THE
TRANSPORT PROTECTION
Transport protection
This sticker indicates that the backing pump transport lock
must be released prior to commissioning.
warranty seal
Closure seal
The product is sealed ex-factory. Damaging or removing a clo-
sure seal results in loss of the warranty.
Protection class
The sticker describes protection class 1 for the product. The
positioning indicates the position for the ground connection.
Electrical voltage warning
The sticker warns of the risk of electric shock when working
with the housing open.
Mandatory: disconnect mains plug
The sticker indicates that the mains plug is to be disconnected
from the device prior to installation and maintenance work.
Tbl. 1:
Stickers on the product
About this manual
8/60
