
2:3
Preparations
Changing the presser foot
Turn off the on/off switch
Snap off the presser foot
Press the front part of the presser foot up and, at the same time the rear
part down until it disengages from the presser foot holder.
Presser foot lift
The presser foot is raised manually by swinging the presser foot lift up
to the right. It is lowered by swinging it down to the left. See page 3:9
on how to raise and lower your presser foot automatically.
Check that the presser foot is properly attached by raising the presser
foot lift.
Snap on the presser foot
Place the presser foot under the presser foot holder, so that when the
presser foot lift is lowered the pins of the foot snap onto the presser
foot holder.
Summary of Contents for perfomance 2058
