GB
Worm gear screw jack SHE type1 and type2
High-performance screw jack HSE type1 and type2
T13.01.000.0000.0003
2019/04 Rev. Index E
Subject to technical modifications
Design changes under reserve
Sous réserve de modifications techniques !
23
11
Lubricants
Ambient
temperature
range [°C]
Lubricant
1)
ISO-
NLGI
1)
SHE/Merkur
gear box and
Tr.
screws
SHE0.5-100
M1 –M8
-30 up to 0
Grease KP2E-
40
NLGI 2
SKF LGLT 2 4)
ISOFLEX LDS 18
Special A
Molub-Alloy 243
Arktik
UNIREX
S 2
gleitmo 585K
-15 to +40
Grease KP2K-
20
NLGI 2
EP 2 special
grease for lifting
gears
Klüberplex
BE 11-462
Beacon
EP 2
gleitmo 585K
+20 to +80
Grease KP2K-
20
NLGI 2
EP 2 special
grease for lifting
gears
Klüberplex
BE 11-462
Beacon
EP 2
gleitmo 585K
+40 to +180
Grease KP2S-
20
NLGI 2
Klübersynth
BH 72-422
URETHYN E/M 2
SHE screws
BG150 / BG200
0 to +50 °C
Grease KP0K-
20
NLGI 0
Grafloscon C-SG
2000 Ultra
Molub-Alloy 936
SF Heavy
CEPLATTYN KG
10 HMF 2500
SHE gears
BG150 / BG200
0 to +50 °C
CLP
VG 680
Klüberoil
GEM 1-680 N
Optigear
BM 680
GEARMASTER
CLP 680
SHE screws
(trapezoidal
thread)
-30 up to 0
Grease KP2E-
30
SKF LGLT 2 4)
ISOFLEX LDS 18
Special A
Molub-Alloy 243
Arktik
UNIREX
S 2
gleitmo 585K
-15 to +80
Grease KP2K-
20
PS-Grease 011
Klüberplex
GE 11-680
Molub-Alloy 936
SF Heavy
gleitmo WSP
5040
+40 to +120
Grease KP2S-
20
Klübersynth
BH 72-422
URETHYN E/M 2
HSE gear
-30 up to 0
S
yn
th
. o
il
C
LP
-P
G
VG 68
Klübersynth GH 6-80
-15 to +40
VG220
Klübersynth GH 6-220
Tribol 800/220
Glycolube 220
Gearmaster
PGP 220
+40 to +120
VG680
Klübersynth GH 6-680
Gearmaster
PGP 680
SHE gear
oil lubrication
-30 up to 0
Synth. oil PGLP
VG100
Klübersynth GH 6-100
-15 to +40
Mineral oil CLP
VG220
Divinol ICL ISO
220 5)
Klüber oil
GEM 1-220 N
Optigear
BM 220
Spartan EP
220
Gearmaster
CLP 220
+20 to +80
Mineral oil CLP
VG680
Klüberoil
GEM 1-680 N
Optigear
BM 680
Spartan EP
680
Gearmaster
CLP 680
+40 to +120 Synth. oil PGLP
VG680
Klübersynth
GH 6-680
Gearmaster
PGP 680
Ku screws
-30 up to 0
Grease KP2E-
30
NLGI 2
SKF LGLT 2 4)
ISOFLEX LDS 18
SPEZIAL A
gleitmo 585 K
-15 to +80
Grease KP1K-
20
NLGI 1
1)
Stabutherm GH 461
URETHYN E/M 2
+40 to +120
Grease KP1K-
20
NLGI 1
1)
Stabutherm GH 461
URETHYN E/M 2
Printed bold =
Standard lubricants: Factory-filed gear lubrication or otherwise lubrication recommendation for screws
Attention:
The alternatives to our standard lubricants are specifications of the lubricant manufacturers.
Pfaff-silberblau does not have any references whether the lubricants meet the manufacturer specifications.
Lubricant selection:
The temperature ranges refer to the ambient temperature. Higher lubricant temperatures that may result
during the operation of the drive elements have already been taken into account.
Standard temperature range: -15 °C to +40 °C
Only if the limits of the standard temperature range is exceeded should lubricants of other temperature ranges be
used.
To operate the drive elements in temperature ranges that deviate from the standard, design modifications are necessary
along with possible construction measures. Observe the technical data according to the order confirmation and the operating
instructions.
Observe the lubricant specifications in the type plate.
Mineral and synthetic lubricants should not be mixed together. It is recommended to generally not mix lubricants or to check
the composition.
1)
Specifications refer to the factory
lubricant
2)
Critical start-up characteristics at low temperatures
should be
observed.
4)
SKF GmbH
5)
Gmelin GmbH & Co. KG
Used lubricants are to be disposed of in accordance with legal requirements!
