19
Takeup lever guard removed for photos only.
Never run the machine without the guard in
place, extreme head injury may occur. This
guard is not a handle keep your hand clear as
your fingers can get pinched.
Figure 5
Figure
6
6.
Thread runs under silver angle bracket. See picture for details.
Figure 4
7.
Bring the thread up through the thread guide just
above the check spring.
Figure 4
8.
Take thread through the take up lever from back to
front.
Figure 5
9.
Bring the thread down through the two thread
guides on the left side.
10.
Bring the thread through the thread eyelet directly
above the needle.
Figure 6
11.
Thread the needle front to back.
Figure 6
TIP: Use a dental floss threader to thread the guide directly above the needle. The threader will also
thread your needle.
Summary of Contents for GrandQuilter 18.8
Page 1: ...Owner s Manual...
Page 28: ...28...