Pfaff Expression 3.5, Owner'S Manual, Page: 23 / 48

2:11
Pr
epar
ations
Presser foot down and pivot toggle (10)
Lower the presser foot completely. Press the button
once more to raise the presser foot to pivot height.
The presser foot is lowered automatically when
you start sewing.
Start/stop (11)
Press this button to start or stop the machine
without using the foot control. Press the button
once to start and press it again to stop.
*UDSKLFGLVSOD\
The graphic display lets you view all your
selections and options. Stitches are shown in real
size.
Stitch width or stitch positioning (13)
Increase or decrease the stitch width using the +
and - buttons.
Press the alternatives button (15) to view the stitch
positioning for the selected stitch. Use the + and -
buttons to change the stitch position.
6WLWFKOHQJWKRUVWLWFKGHQVLW\
Increase or decrease the stitch length using the +
and - buttons.
Press the alternatives button (15) to view the
density setting for satin stitches. Use the + and
- buttons to change the density for the selected
stitch.
Alternatives (15)
When you select a decorative stitch, the width
and length settings will be shown on the graphic
display. By pressing the alternatives button, the
stitch positioning will be shown instead of the
stitch width setting and the density will be shown
instead of the length setting.
Wheel (16)
Use these buttons to move around the graphic
display. The wheel has up and down arrow
buttons, left and right arrow buttons and the wheel
center icon is an OK button.
The wheel has several functions, for example
stepping between stitches, setting the size of a
buttonhole and moving between options in the
settings menu.
Direct selection (17)
By pressing one of, or a combination of, the 0 to 9
buttons, you select the stitch represented by that
number immediately.
F1 - Function 1 (18)
The F1 button is used to set the tapering program.
It is also used to repeat buttonholes and to
deactivate repeat for darning stitches. All selections
will be shown on the graphic display.
In sequencing the F1 button is used to select a
character set.
F2 - Function 2 (19)
The F2 button is used to set the tie-off and thread
snips options and in sequencing it is used to select
font. All selections will be shown on the graphic
display.
Info button (20)
Press this button to toggle the recommendations
view on and off.
Settings menu (21)
Press this button to open the menu for machine
settings.
Mirror end to end (22)
For mirroring stitches and sequences end to end.
Mirror side to side (23)
For mirroring stitches and sequences side to side.
Load personal stitch or sequence (24)
Press this button to load a personal stitch or
sequence.
Save personal stitch or sequence (25)
Press this button to save a stitch or sequence to the
machine’s memory.
Clear (26)
For deleting single stitches in a sequence, or
personal stitches and sequences.
Sequencing (27)
Press this button to enter sequencing.