3:14
D
C
G
F
E
A
B
Sewing
Automatic darning – 28
(Model 2048)
Stitch 28 is for strengthening damaged areas of fabric and
repairing tears.
• Stitch over the damaged area at the required length.
• Press the reverse button; the machine
fi
nishes sewing the
darning program and the darning length is saved.
The saved darning length can now be repeated as often as
needed.
Free Motion Sewing
Insert the darning foot:
Loosen screw D. Set the needle at its highest point and push the
pin of the darning foot fully into the hole C of the sewing foot
holder. When doing this, the guide fork G should position itself
around the presser bar. The lever E must be behind the
fi
screw F. Now tighten screw D.
Free Motion Position:
Lower the presser foot lifter (A) while pushing it lightly to the
rear. This snaps the presser foot lifter into a notch (B) on the
back side of the sewing machine. In this position the thread
tension is engaged for Free Motion Sewing.
• Drop the feed dog.
• Select a straight stitch or a zigzag stitch.
• Keep an even speed, manually move your fabric.
Tip: For even stitches, move your fabric at a smooth even
fl
ow. Move
the fabric so the stitching does not cross.