Pfaff creative sensation pro, Owner'S Manual, Page: 48 / 166

3:10
PF
AFF
®
creativ
e
™
Color T
ouch Scr
een
Stitch width safety
6HOHFWWKLVIXQFWLRQZKHQXVLQJDVWUDLJKWVWLWFK
presser foot to lock the needle in center position for
DOOVWLWFKHVSUHYHQWLQJGDPDJHWRWKHQHHGOHDQGRU
presser foot.
7KLVIXQFWLRQLVDXWRPDWLFDOO\VHOHFWHGDQGFDQQRW
be deselected, when the straight stitch needle plate
is attached.
When turning on the machine with this setting
DFWLYDWHGDQGIRUHYHU\VWLWFKVHOHFWLRQWKDWLVQRW
DVWUDLJKWVWLWFKDSRSXSLQIRUPV\RXWKDWLWLVVHW
WRVWUDLJKWVWLWFK'HVHOHFWVWLWFKZLGWKVDIHW\WRJR
back to normal sewing.
Note: Twin needle and stitch width safety cannot be used
at the same time.
Start/stop button safety
6HOHFWWKLVIXQFWLRQWRGLVDEOHWKHVWDUWVWRSEXWWRQ
LQVHZLQJPRGH7KLVSUHYHQWVWKHPDFKLQHIURP
VWDUWLQJWRVHZLIWKHVWDUWVWRSEXWWRQLVWRXFKHGE\
mistake. When this function is selected, you must
use the foot control to sew.
Cut jump stitches
Your machine features the automatic function
&XWMXPSVWLWFKHV7KLVIXQFWLRQVDYHV\RXWLPH
trimming after the embroidery is completed. When
&XWMXPSVWLWFKHVLVVHOHFWHG\RXUPDFKLQHZLOOWULP
WKHWRSMXPSVWLWFKWKUHDGDQGSXOOWKHWKUHDGHQG
to the underside of the fabric as you embroider.
Note: Your machine will also cut the thread after you
have changed to a new color. Hold the thread end when
you start embroidering again, so that you can easily
remove the thread end when cut.
Designs marked with this symbol are
programmed for Cut jump stitches. Trim
commands to cut jump stitches can be added
to any design using the software package
downloaded via the PFAFF
®
website (see page
2:13).
Automatic thread snips
When selected, the automatic thread snips is
DFWLYDWHG7KHWKUHDGVDUHFXWDXWRPDWLFDOO\DQG
the presser foot raises at color changes or when
DQHPEURLGHU\LVÀQLVKHG:KHQGHVHOHFWHGQR
automatic thread snips will be performed.
p