Pfaff CREATIVE 2124, Owner'S Manual, Page: 43 / 97

Embroidery
3:7
Function buttons for embroidery
This section contains the function buttons for
the embroidery.
Parking position
The parking position button (102) is used for
putting the embroidery unit in the right posi-
tion for storage or placing it in the embroidery
case (optional accessory). The letter P will be
shown on the window.
Note : Make sure that you have removed the hoop
before pressing the parking position button.
Hoop select button
When embroidering on your Pfaff creative
2124, you need to choose a hoop for your
embroidery. There are 3 different hoops
available: 225x140 mm (no 1 in the window),
120x115 mm (no 2) and 80x80 mm (no 3).
To select a hoop, press the hoop select button
(101) to jump between the hoops. For best
embroidery results, the machine always recom-
mends the smallest possible hoop size when
loading a design. In the window you will see the
hoop number and the hoop icon (A).
If no other hoop can be selected due to the size
or position of the design, you will hear a beep
and the hoop sizenumber will fl ash.
Note : If you have mirrored and/or rotated a design,
and then change the hoop, these settings will be
reset.
Orbiting
The orbiting function makes it possible for you
to check the outlines of your design. For each
touch of the orbiting button (103) the hoop will
move to a corner starting with the upper left.
An arrow (A) will fl ash beside the hoop on the
window showing you which corner the needle
is in.