Pfaff C1100 Pro Owner'S Manual Download Page 2

SAFETY INSTRUCTIONS

1

INSTRUCTIONS

When using an electrical appliance, basic safety should always be followed, including the following:
Read all instructions before using this sewing machine.

Never operate the appliance with any air openings blocked

Always use the proper needle plate, as a wrong needle plate can cause the needle to break.

Switch the sewing machine off ("O") when making any adjustments in the needle area, such as

threading the needle, changing the needle, threading the bobbin, changing the presser foot or

changing the light.

1. An appliance should never be left unattended when plugged in.
2. Always unplug this appliance from the electrical outlet immediately after using and before cleaning.
3. Always unplug before checking and re-lamping. Contact the authorized retailer or service center for

repair in the event of failure if the machine is with 200mW, 300mW and 200mW LED lamp, which is

not user-replaceable.

1. Do not allow to be used as a toy. Close attention is necessary when this appliance is used by or

near children.

2. Use this appliance only for its intended use as described in this manual. Use only the attachments

recommended by the manufacturer as contained in this manual.

3. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has

been dropped or damaged, or dropped into water. Return the appliance to the nearest authorized

retailer or service center for examination, repair, electrical or mechanical adjustment.

4.

. Keep ventilation openings of the

sewing machine and foot control free from accumulation of lint, dust, and loose cloth.

5. Keep fingers away from all moving parts. Special care is required around the sewing machine needle.
6.
7. Do not use bent needles.
8. Do not pull or push fabric while stitching. It may deflect the needle causing it to break.
9.

10.Always unplug sewing machine from the electrical outlet when removing covers, lubricating, or

when making any other user servicing adjustments mentioned in the instruction manual.

11.Never drop or insert any object into any opening.
12.Do not use outdoors.
13.Do not operate where aerosol spray products are being used or where oxygen is being administered.
14.To disconnect, turn all controls to the off ("O") position, then remove plug from outlet.
15.Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

16.The sound pressure level under normal operating conditions is 75dB(A).
17.
18.Never place anything on the Foot Control.
19.If the supply cord that fixed with Foot Control is damaged, it must be replaced by the manufacturer or

its service agent or a similar qualified person in order to avoid a hazard.

20.This appliance is not intended for use by persons (including children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge, unless they have been given

supervision or instruction concerning use of the appliance by a person responsible for their safety.

21.Children should be supervised to ensure that they do not play with the appliance.

This sewing machine is intended for household use only.

DANGER

WARNING

SAVE THESE INSTRUCTIONS

-To reduce the risk of electrical shock:

-To reduce the risk of burns, fire, electrical shock, or injury to persons:

Please turn off the machine or unplug when the machine is not operating properly.

Summary of Contents for C1100 Pro










Reviews: