Installation and commissioning
8 - 1
Fig. 8 - 01
2
1
1
8
Installation and commissioning
The machine must only be installed and commissioned by qualified personnel!
All relevant safety regulations must be observed!.
8
.01
Installation
Suitable connections for power and compressed air, an even and firm floor surface and
sufficient lighting must be provided for at the installation site.
8
.01.01
Adjusting the table height
●
Loosen screws
1
and
2
and set the table at the required height.
●
Tighten screws
1
firmly.
●
Set the pedals as required and tighten screws
2
.