2 - 3
Adjustment
Fig. 2 - 02
2
4
6
32.5 - 33 mm
1
3
3
3
5
5
4
1
2
.06
Pre-adjust the thread catcher
Requirement
1. Between the point of the thread catcher
4
and the front edge of the mounting plate
1
there must be a clearance of
32.5 - 33 mm.
2. The guide plates
5
must be parallel to the mounting plate
1
.
3. The thread catcher
4
should move freely and with little play.
●
Remove mounting plate
1
(screws
2
).
●
Loosen screws
3
.
●
Adjust thread catcher
4
according to
requirement 1
.
●
Align guide plates
5
according to
requirements 2
and
3
and tighten screws
3
.
●
Making sure that the ball stud
6
engages in the actuator of thread catcher
4
, unscrew the
mounting plate
1
.