10
Preparation
●
Screw on union nut
1.
●
Insert the plastic plate or the lattice
supplied depending on the material, and
screw in place with the union nut
1
.
●
Loosen counter nut
2
and set the
material thickness to be processes by
turning the clamping plate
3
.
The material thickness should
be set in such a way that no
water can escape during the
test process while the clamping
lever
4
is engaged, but also that
the material is not marked with
pressure marks.
0
+
-
1
0.
.8
0.4
0.6
Fig. 6 - 01
1
6 Preparation
6
.01
Setting the test material thickness
2
4
●
Unscrew screw
1
from water tank
2
.
●
Fill the tank
2
with water, while ensuring
that it cannot escape from the pressure
plate
3
.
●
Replace the screw
1
.
Only use distilled water to
prevent lime scale build-up.
Fig. 6 - 02
1
2
3
6
.02
Filling the water tank
3