Projection Alarm Clock
Power on or Reset
MANUAL INSTRUCTION
-
+
mode
Z
Z
1
2
1.The LED displays for 2 seconds, and enters the
standard mode after a beep of "BI".
2.When the alarm is in the process, only the button
battery CR2032 is powered after the AC power is
disconnected.Then,even if the AC power is
connected, the alarm is not maintained.
Note: The CR2032 backup battery is powered
separatelyand only retains memory and
timekeeping functions.
Time setting
1.Under standard mode, long press “mode” button
will enter the time setting mode.The setting
sequence:12h/24h-> hour -> minute ->second.
2
.
Hour/minute setting:Press “+” or “-”button,adjust
the hour/minute(single press for addition and
subtraction;long press for addition and subtraction
quickly[8 steps/ second]).
Power on or Reset
<4>
