English
37 - 117
3.
Place the contact tips on the terminals of the component
or circuit to be measured ;
The measured resistance is displayed on screen.
3.1.3
Continuity test with buzzer
Attention : all continuity measurements must be made in the
absence of any voltage
To test electrical continuity, proceed as follows :
1.
Set the switch to
;
2. Press . The
symbol is displayed ;
3.
Connect the black lead to the COM terminal and the red
lead to « + ».
4.
Place the contact tips on the terminals of the component
or circuit to be tested ;
The buzzer indicates continuity ; the measured resistance is
displayed on screen.
3.1.4 Diode
test
Attention : all diode test measurements must be made in a
power-off condition.
To test a diode, proceed as follows :
1.
Set the switch to
;
2. Press twice. The
symbol is displayed ;
