PEWA AMPROBE SOLAR-100, User Manual, Page: 10 / 14

7
UÊÊ "/\Ê7 i˜ÊÌ iʏˆ} ÌÊÃi˜ÃœÀÊVœÛiÀʈÃʘœÌÊ>ÌÌ>V i`Ê
“CAP” is indicated. Make sure that it is attached.
vÊ«iÀvœÀ“ˆ˜}ÊÌ iÊâiÀœÊ>`ÕÃ̓i˜ÌÊÊ>vÌiÀÊ«œÜiÀˆ˜}Ê
on, several digits may not disappear. In this case,
«iÀvœÀ“ÊÌ iÊâiÀœÊ>`ÕÃ̓i˜ÌÊ>}>ˆ˜°
/œÊi>ÃÕÀiʜÕÃi½ÃÊ7ˆ˜`œÜÃÊ-œ>ÀʘÃՏ>̈œ˜
UÊÊi>ÃÕÀiÊÌ iÊ܏>Àʈ˜ÃՏ>̈œ˜ÊivviVÌʜvÊޜÕÀÊ œÕÃi½ÃÊ
windows
UÊʏœÃiÊÌ iÊ܈˜`œÜ°Ê*ÀiÃÃÊÌ iʺ ” button on
your SOLAR-100 solar power meter, and “00.0”
comes up on the screen. Put the device close to the
window and aim it at the sun. Compare the value
against that acquired when the window is closed
and the device is placed at the same position, in
order to understand the window’s heat efficiency.
(
Picture 2 )
>ÝÊÉʈ˜Ê ÕÌ̜˜Ê
UÊÊ7 i˜ÊޜÕÊÌiÃÌʈ˜Ê7ɓÓʜÀÊ /1Ê­vÌÓI ®Ê«ÀiÃÃÊÌ iÊ
“ ” button to display the max. or min. reading.
UÊÊ*ÀiÃÃÊ>˜`Ê œ`ÊÌ iʺ ” button for 1 second to
allow the device to read the max. value. Press the
button one more time to read the min value.
UÊÊ*ÀiÃÃÊ>˜`Ê œ`ÊÌ iʺ ” button for more than 1
second, and the max. and min. come off.
UÊÊ7 i˜ÊÌ iʺ ” button is functional, the “ ”
button is disabled.
/1Ê­vÌÓI ®ÊÉÊ7ɓÓÊ ÕÌ̜˜
UÊÊ*ÀiÃÃÊÌ iʺ ” button to turn ON the power
and put the device to operating mode. The screen
displays BTU (ft2*h). Press the “
” button to
switch from BTU (ft2*h) to W/m2. To select a
`ˆvviÀi˜ÌÊ՘ˆÌ]ʍÕÃÌÊ«ÀiÃÃÊÌ ˆÃÊLÕÌ̜˜Êœ˜ViÊ>}>ˆ˜°