MISCELLANEOUS OPERATIONS
43
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
- Clean the body of the carburettor and its
components with a cleanser. P/N 755700.
-
Blow into every jet and duct of the
carburettor body with compressed air.
Note: Do not use any metal tool which can
damage the ducts of these items.
Reassembly
- Fit the jet spray nozzle (16).
- Fit the main jet (15).
- Fit the idle adjuster screw (14).
- Place the needle valve in the grooves of the
float 2.
- Fit the pin into the float.
- Install the float on the carburettor body while
fitting the needle valve into its recess.
- Position the pin in its recess.
- Fit and tighten the screw (C) that secures
the float pin.
Install a new paper gasket. (11)
-
Fit teh float chamber.
- Fit and tighten the 4 screws of teh float
chamber.
15
14
16
2
C
11
N
