PEUGEOT 807, Handbook

Page: 72 / 234

70
Seats
Removing the bench seat
1. Fold the seat to the vertical
position.
2. Grasp the two bars E underneath
the seat.
3. The front anchorages unlock.
Re fi tting the bench seat
For removal and re fi tting, pass the
rear seat, in the "folded" position,
through the sliding side doors.
Check that there is nothing
blocking the runners which could
prevent correct locking of the
bench seat anchorages.
1. Position the front anchorages at the
front stop of the runners.
2. Tilt the folded seat rearwards.
3. The rear anchorages then lock.
4. Unlock the seat back and lift it
using the strap C .
Good practice
When the vehicle is being driven, it is
prohibited for a passenger to sit:
-
in row 3 if the seat back in front
(row 2) is in the table position.
- in row 3 if the seat/bench in front
(row 2) is in the vertical folded
position.
- in the centre seat if the right-hand
side seat is in the vertical folded
position.