280
In the event of a breakdown
To refit, close the protective cover very
carefully to guarantee the leak-tightness
of the lamp.
Changing dipped beam headlamp
bulbs (on models with halogen
headlamps)
F
Remove the protective cover by pulling the
tongue.
F
Pull the connector back to disconnect it.
F
Pull the bulb back to extract it.
F
Replace the bulb.
For reassembly, carry out these operations in
reverse order.
Changing main beam headlamp
bulbs (on models with halogen
headlamps)
F
Remove the protective cover by pulling the
tongue.
F
Turn the bulb holder a quarter turn and pull
it out.
F
Pull the bulb out and replace it.
For reassembly, carry out these operations in
reverse order.
Changing foglamp bulbs (on
models with halogen headlamps)
F
Introduce a flat screwdriver in the hole in
the finisher.
F
Pull and lever to unclip the foglamp trim.
F
With a Torx screwdriver, remove the two
module fixing screws.
F
Remove the module from its housing.
Summary of Contents for 5008 2017
