PEUGEOT 4008 2012 Handbook Download Page 164

Page: 164 / 332

162

Safety

Child seats recommended by PEUGEOT

Group 0+: from birth to 13 kg

"RÖMER Baby-Safe Plus"

Installed in the rearwards-facing position.

Group 1: from 9 to 18 kg

"FAIR G 0/1 S ISOFIX"

Installed forwards-facing, without the ISOFIX base.

6 positions of inclination of the shell.

"RÖMER Duo Plus ISOFIX"

Installed forwards-facing.

Can be secured with the seat belt.

3 positions of inclination of the shell.

PEUGEOT offers a range of recommended child seats which are secured using a

three point seat

belt

These seats can also be installed using
the ISOFIX mountings (see following
pages).

Follow the instructions for fitting
the child seat given in the seat
manufacturer's installation guide.

Summary of Contents for 4008 2012













































































































































































































































































































































Search results

Summary of Contents for 4008 2012

Reviews:

Brands by name

Popular brands

PEUGEOT 4008 2012, Handbook

Search results

Summary of Contents for 4008 2012

Reviews:

Brands by name

Popular brands