PEUGEOT 208 2017, Handbook

Page: 99 / 304

97
5
Safety
"ISOFIX" mountings
Your vehicle has been approved in accordance
with the
latest ISOFIX regulations.
The seats, shown below, are fitted with ISOFIX
compliant mountings:
There are three rings for each seat:
This arrangement reduces forward tipping of
the child seat in the event of a front impact.
This ISOFIX mounting system provides fast,
reliable and safe fitting of the child seat in your
vehicle.
ISOFIX child seats are fitted with two latches
which are secured on the two rings A .
Some seats also have an upper strap which is
attached to ring B .
F
pass the strap of the child seat over the seat
backrest, centring it between the openings
for the head restraint rods,
F
fix the hook of the upper strap to ring B ,
F
tighten the upper strap.
When fitting an ISOFIX child seat to the
left-hand rear position of the bench seat,
before fitting the seat, first move the
centre rear seat belt towards the middle
of the vehicle, so as to avoid interference
with the operation of the seat belt.
The incorrect installation of a child seat
in a vehicle compromises the child's
protection in the event of an accident.
Strictly follow the fitting instructions
provided in the user guide supplied with
the child seat.
For information on the possibilities for
installing ISOFIX child seats in your
vehicle, refer to the summary table.
- two rings A , located between the vehicle's
seat backrest and cushion, indicated by a
marking,
- a ring B , behind the seat, indicated by a
marking, called Top Tether , for securing the
upper strap.
To secure the child seat to the TOP TETHER :
F
remove and stow the head restraint before
installing the child seat in this position (refit
it once the child seat has been removed),