PEUGEOT 208 2017, Handbook

Page: 82 / 304

80
Safety
Reactivation
Deactivation can be configured in
the
Driving / Vehicle menu.
It is confirmed by the display of a message.
These systems are reactivated automatically
each time the ignition is switched back on or
above 30 mph (50 km/h).
Below 30 mph (50 km/h), you can reactivate
them manually.
For the 1.6 THP 165 and THP 208 petrol
engines, the reactivation must always be
carried out manually.
Reactivating using the button
F
Press this button again to
reactivate manually.
The indicator lamp in the button goes off.
Reactivating using the touch screen
Reactivation can be configured in
the
Driving / Vehicle menu.
It is confirmed by the display of a message.
Operating fault
Illumination of this warning lamp,
accompanied by the display of a
message and an audible signal,
indicates a fault with the system.
Contact a PEUGEOT dealer or a qualified
workshop to have the systems checked.
ASR / DSC
These systems offer increased safety
in normal driving, but they should not
encourage the driver to take extra risks or
drive at high speed.
It is in conditions of reduced grip (rain,
snow, black ice) that the risk of loss of grip
increases. It is therefore important for your
safety to keep these systems activated in
all conditions, and particularly in difficult
conditions.
The correct operation of these
systems depends on observation of
the manufacturer's recommendations
regarding as much the wheels (tyres and
rims), braking and electronic components
as the assembly and repair procedures
used by PEUGEOT dealers.
The use of snow tyres is recommended,
in order to be able to benefit from the
efficiency of these systems in winter
conditions.
In this case, it is essential to equip the
four wheels with tyres approved for your
vehicle.
Deactivating using the touch screen
The systems no longer have an effect on
engine operation.