PEUGEOT 2014 3008 Handbook Download Page 18

Page: 18 / 214

Monitoring

Parking space
sensors

fixed.

The parking space sensors function
is active.

Press the corresponding button to deactivate it.

flashing.

The system is measuring the space.

Once the measurement has been done, the warning
lamp comes on fixed again.

Stop & Start

fixed.

When the vehicle stops (red lights,
traffic jams, ...) the Stop & Start
system has put the engine into
STOP mode.

The warning lamp goes off and the engine restarts
automatically in START mode, as soon as you want to
move off.

flashes for a
few seconds, then
goes off.

STOP mode is temporarily
unavailable.
or
START mode is invoked
automatically.

For more information on special cases with STOP
mode and START mode, refer to the "Stop & Start"
section.

Warning lamp

is on

Cause

Action / Observations

Summary of Contents for 2014 3008























































































































































































































Search results

Summary of Contents for 2014 3008

Reviews:

Related manuals for 2014 3008

Brands by name

Popular brands

PEUGEOT 2014 3008, Handbook

Search results

Summary of Contents for 2014 3008

Reviews:

Related manuals for 2014 3008

Brands by name

Popular brands