PEUGEOT 2011 207, Handbook

Page: 143 / 250

9
i
PRACTICAL INFORMATION
141
Access to the spare wheel (SW)
The spare wheel is installed in the boot
under the fl oor.
To gain access to it, refer to the para-
graph "Access to the tools".
Fitting the steel spare wheel
If your vehicle is fi tted with al-
loy wheels, it is normal to notice,
when tightening the bolts on fi tting,
that the washers do not come into
contact with the steel spare wheel.
The wheel is secured by the coni-
cal contact of each bolt.
Taking out the wheel
)
Unscrew the yellow central bolt.
) Raise the spare wheel towards you
from the rear.
) Take the wheel out of the boot.
Putting the wheel back in place
) Put the wheel back in its housing.
) Unscrew the yellow central bolt by a
few turns then put it in place in the
centre of the wheel.
) Tighten fully until the central bolt
clicks to retain the wheel correctly.
) Put the box back in place in the
centre of the wheel.
)
Put the boot fl oor back in place.