15-07-2002
Map configuration
This function offers various possibilities to optimise and
enhance the display of the route:
– map orientation,
– type of services displayed,
– selection of scale.
Map orientation
This function allows orientation of the map to be selected:
North or according to the direction of the vehicle.
Note: the "vehicle orientation" option is only active if the
display scale is less than or equal to 1km.
Types of services displayed
This function allows the required service to be displayed.
From the list presented, select the service(s) required (for
insertion), the service(s) not required (for deletion), or
choose 'Any' (parking, hotel, restaurant, service station,
cinema...).
Changing the route
This function allows you, for example, to avoid a tail-back
on the route which has been worked out.
Using the 'Navigation/Guidance' context menu, or by
holding down the last voice message recall control, you
can introduce a change to the route that had been worked
out, at any time during guidance.
This change occurs on the stretch between your present
position and a point located at a distance which has to be
input, using the initial route.
Enter a distance between 1 and 10 km, using the alphanu-
meric keypad, then confirm.
The system takes this change into account and suggests
new guidance, having invalidated the section selected.
Details of the route
At all times during guidance, the sub-menu 'Details of the
route' gives you access to the following functions:
– destination selected,
– see the places to be travelled through (display of roads,
streets and towns to be passed),
– see the route on the map (change to map display).
A pointer located on the side indicates your position in rela-
tion to the route.
Geographical information
The sub-menu 'Geographical information' presents the
GPS information regarding the position of the vehicle.
YOUR 607 IN DETAIL
85
