Peugeot Motorcycles PULSION, User Manual, Page: 41 / 52

Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles 39/48
)5
*%
'(
,7
(6
1/
*5
6(
37
),
'.
MAINTENANCE ADVICE
Ensure that the servicing schedule for your vehicle is
strictly followed to maintain your contractual
warranty rights
A table of inspections for the maintenance schedule is
inserted into the maintenance booklet. The registered
dealer must add his stamp, the date of servicing and the
number of kilometres the vehicle has covered.
In order to maintain maximum safety and reliability of
your vehicle, you are advised to have maintenance
and repairs carried out by a registered dealer who
has the necessary technical training, specific tools
and spare parts.
ENVIRONMENT / RECYCLABLE
Worn parts replaced during routine maintenance
(mechanical parts, battery, etc.) must be disposed of
with specialised bodies.
At the end of its life, the vehicle must be taken to an
authorised centre for recycling.
In all cases, comply with the local laws.
CLEANING THE VEHICLE
Wash the bodywork with soapy water and rinse with
generous amounts of clear water.
The vehicle can be dried with a chamois leather. After
washing the vehicle, brake several times at low speed to
dry out the brakes.
Certain silicon-based products can alter the quality of the
paintwork. In case of need or doubt, a registered dealer
can advise you on using cleaning products or restoring
scratched bodywork.
SPARK PLUG INSPECTION OR REPLACEMENT
The engine must be cold.
• Lift the seat and remove the storage compartment.
• Disconnect the suppressor (1).
• Remove the spark plug.
SERVICE OPERATIONS
Batteries contain harmful substances.
They must be disposed of according to
the legal requirements and must under
no circumstances be thrown away in the
household waste.
The bodywork is made of plastic parts
that can be painted or are shiny. Do not
use solvents or cleaning products that
are too corrosive.
Do not use high pressure cleaners
which may cause water to infiltrate
the following parts: seals, bearings
and hinges, electrical components
such as connectors, contactors and
lighting...
The vehicle should be washed in a place
equipped for wastewater collection.
It is essential to use a resistive spark
suppressor and a resistive spark plug
in accordance with the manufacturer's
recommendations.
We advise you to visit a registered
dealer for the replacement of these
components.
1