www.petsafe.net 11
Programming the Mode Settings
All programming is done through the Barrier Transmitter and the
programming is synchronized with the Receiver Collar. The Receiver Collar
cannot be programmed separately from the Barrier Transmitter.
You may synchronize multiple Receiver Collars to a single Barrier
Transmitter at one time. However, make sure any Receiver Collar you do
not wish to synchronize is turned OFF during the programming procedure.
Any collar that is within 5 feet of the Barrier Transmitter and turned ON
may be reprogrammed. Familiarize yourself with the steps outlined below
before attempting to program the Barrier Transmitter and Receiver Collar.
To prevent an unintended correction, do not perform set up
procedures while the Receiver Collar is on your pet.
1. Gather the Receiver Collar(s) you wish to synchronize with the Barrier
Transmitter. Turn the Receiver Collar(s) ON and place less than one foot
from the Barrier Transmitter.
2. Turn the Barrier Transmitter OFF by pressing the DOWN (-) arrow
button until there are no bars displayed in the LCD window. Remove
the battery door.
