5
www.petsafe.net
The “Stay” Command
1. Put a separate, non-metallic collar on your pet’s neck ABOVE the Receiver Collar,
and attach a 3 metre lead.
Note: Be sure the extra collar does not put pressure on the
Vibration Points.
2. Visibly identify a designated area where you want your pet to sit by placing his bed or a
large piece of cloth on the ground.
3. After identifying a place, put your pet in that area. Hold your lead in one hand and the
Handheld Remote in the other.
4. Staying within approximately 1 metre, walk around the perimeter of the designated
area. Do not say anything to your pet.
5. If your pet tries to leave that area, press and hold the Vibration Button while saying
“Stay”, and if necessary, use the lead to guide your pet onto the designated area.
6. Immediately release the Vibration Button as soon as your pet returns to the area and
praise him enthusiastically.
7. Once your pet has settled for a few seconds, release him and play calmly.
8. Repeat steps 1 through 5.