10 1-800-732-2677
4B.
Drill four
7
/
64
” (2.5 mm) holes. DO NOT drill through the
other side of the sliding glass door or Sliding Glass Pet Door
(Repeat for second latch)
4C.
Secure the latches and keepers with 8
3
/
4
” flat head sheet metal
screws. DO NOT OVERTIGHTEN (Repeat for second latch).
Helpful Tip:
If overtightening results and
you have stripped the connection, move
the latch slightly up or down and re-drill
mounting holes. Another option is to drill
existing holes to a larger size and install
plastic anchors. Plastic anchors can be
purchased at any local hardware or home
improvement store.
Install Glass Sweep and Weather Stripping
5A.
The glass sweep should be
installed on the back edge
of the sliding glass door to
form a seal between the
sliding glass door and the
stationary glass door. The
weather stripping should be
installed on the front edge
of the sliding glass door to
form a seal between the
Sliding Glass Pet Door and
the sliding glass door.
Sliding Glass
Pet Door
4B
Sliding Glass
Pet Door
4C
Step 5
Sliding glass door shown here
slightly open
Sliding Glass Pet Door
Install glass sweep here
Install weather stripping here
5A
Summary of Contents for PPA11-14766 PPA11-14767 PPA11-14768
Page 39: ...www petsafe net 39...