www.petsafe.net 15
Prepare the Receiver Collar
Your Receiver Collar comes with
Short Contact Points. Use the
Long Contact Points for pets
with long or thick hair. Tighten
the Contact Points using the
Test Light Tool (
2A
) one-half
turn beyond finger tight. Check
tightness weekly.
Turning the
Receiver Collar ON
Press and hold the Mode Button
continuously for 5 seconds (
2B
).
The Green or Yellow or Red
Receiver Indicator Light will turn
ON for 5 seconds to indicate
battery status, followed by the
Red Receiver Indicator Light
flashing the Static Correction
Level Settings.
2A
2B
Mode
Button
Step
2
Turning the Receiver Collar OFF
Press and hold the Mode Button continuously for 5 seconds
(
2B
). The Red Receiver Indicator Light will be ON during this
time. The Red Receiver Indicator Light will then turn OFF and
all Receiver Indicator Lights will stay OFF indicating that the
unit is turned OFF.
To extend the time between charging the Receiver Collar,
consider turning OFF the Receiver Collar when it is not in use.
Summary of Contents for PIG00-13737
Page 39: ...www petsafe net 39...
