Petsafe PIG00-10778, Operating Manual, Page: 21 / 32

www.petsafe.net 21
Test Light Instructions
CAUTION The Receiver Collar should not be on your dog when the system
is tested. Your pet may receive an unintended correction.
1. Set the correction level to 2 or above.
2. Hold the Test Light contacts to the Contact Points (J)
3. Hold the Receiver Collar at your dog’s neck height
with the Contact Points pointing up (K) and the
Correction Level Button facing the Boundary Wire.
Slowly walk toward the Boundary Wire until you hear
the warning tone and see the Test Light fl ash (L).
J
Note: The Receiver Collar is waterproof,
which can make the beep hard to hear.
Save the Test Light for future testing.
If the Test Light does not fl ash, refer
to the Troubleshooting section in
your PetSafe
® Deluxe Little Dog
In-Ground Fence ™ Operating and
Training Guide or contact the
Customer Care Center.
K
Boundary
Wire
L